General
| Name | ethelbert magnus |
| Your Zip Code | 13223 |
| Additional Details | Cutting Laminate Sheets: All You Need to Know (2022)
Laminate floors have become very popular among house-owners thanks to their affordability and beautiful, rustic look. But installing new hardwood floors can be a pretty pricey operation. Other than the $4 to $8 per square foot of new laminate planks, you’ll also need to take into account $4 to $8 of labor, as well. So, you may have to spend north of $1,000 to get your floor installed.
Many people with the tools and the skills needed can opt to buy new planks and install it themselves. In this guide from TheKingLive, we’ll show you How To Cut Laminate For Your Flooring Or Countertop!
Is It Hard to Cut Laminate Flooring?
Read More:
Learn How To Cut Laminate At Home
How To Cut Laminate: A Comprehensive Guide
Laminate flooring isn’t hard to cut so long that you have some tools. You’ll need some experience dealing with power cutting tools, but you don’t need to be an expert. Typically, you’ll only have to make straight cuts and curved cuts around corners and objects like toilets and counters.
What Are the Tools You’d Need?
A circular saw is preferred. You can use it to make every kind of cut. But if you’ve never used a circular saw or a power tool in general before, we should take a class on safety. Additionally, a circular saw can be a pretty pricey investment if you don’t need to use it often. It can cost anywhere between $50 to $200. But don’t worry, you always have the option to rent it from your local hardware store. It’ll be a lot cheaper.
You don’t necessarily need a power tool for this task. A handsaw, jigsaw, and a crosscut saw will suffice.
Cutting Laminate Floors: 3 Methods
Before you start Cutting Laminate sheets, wear protective gears like gloves, goggles, and have a clean work surface.
Mark the cut on the floor using a pencil or a marker. Use a ruler to measure out the cut correctly.
Clamp the laminate plank against your flat working surface. The cutting edge should line up as close to the edge of your working surface as possible.
Start with a small cut by sawing a small cut from one end of the plank, right on top of the cutting line. After that, follow the rest of the cutting line until finished. Make sure to keep your hand as far away from the saw blade as possible.
Sand the plank down to your preferred finish using a piece of sandpaper.
Mark the cut with a pencil or a marker, then clamp the plank tightly on your working surface. Clamp the plank in a way that the cutting pattern is over the edge of the surface.
Make a small cut to test the direction of the teeth. This will help you understand how to cut so that the best finishing is achieved. In some cases, you may need to flip the plank around to get a nice cut.
As always, mark the cutting line on the plank, then clamp the plank on your working surface. Leave the cutting line over the edge of the surface.
Start cutting with the crosscut saw. Make a small cut on one end to gauge the handling of the saw. Then, follow with the saw all the way across the plank.
Sand down the plank to your desired finish.
Conclusion
Cutting laminate floors isn’t hard! You just need the right tool and technique. We hope this floor-cutting guide from The King Live has helped. |
